Chapter A4: Image Acquisition
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A4-2
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure A4-1 Acquisition screen
Table A4-1 Image Acquisition functions
Function Description
patient identification Identifies the patient name and patient identification number for
the current procedure.
[PATIENT INFORMATION] Displays Patient Information screen for the current procedure.
Refer to Chapter A3: Worklist-Add / Edit Patient Information
(p. A3-
15) for more information.
screen switch tab Switches between the Acquisition and Viewer screens.
NOTE: When acquiring multiple images or if you need to retake an
image, you must switch back to the Acquisition screen in
order to record the exposure.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
