Chapter A5: Image Viewer
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A5-2
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure A5-1 Image Viewer screen
Table A5-1 Image Viewer screen functions
Function Description
patient Identification Identifies the Patient Name and Patient ID as entered on the
Patient Information screen.
screen switch tab If in an active exam, allows you to switch back to the Acquisition
screen. If viewing images from a completed exam, the
Acquisition screen tab is disabled.
NOTE: When acquiring multiple images or if you need to retake
an image, you must switch back to the Acquisition screen
in order to record the exposure.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
