Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-20
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure A7-14 Auto Print
Table A7-7 Auto Print Functions
Function Description
Printer Lists the printers and laser cameras connected to your system.
Film Orientation Sets if the image will print on the film horizontally or vertically.
Available options are:
• Portrait – vertical film orientation
• Landscape – horizontal film orientation
Print Mode Provides options on the size of the image data printed.
Available options are:
• True Size
• Fit to Film
• Reduce Size
• Orthopedic Magnification (if enabled)
Magnification (%) If Reduced Size is selected as the Print Mode, allows you to enter the percent
by which the image will be reduced. The accepted range is between 40% and
90%.
If True Size or Fit to Film are selected as the Print Mode, the text box remains
disabled.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
