Chapter A7: Set Preferences
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A7-21
Operator Manual © 2008 General Electric Company. All rights reserved.
Alternate Print
mode
Available options are:
• Reduce Size
• Left/Right Justified
• Fit to Film
Alternative
Magnification (%)
Allows you to enter an image reduction factor for the secondary printer.
Format Allows you to choose the formats available for the selected printer.
Available options are:
•Standard
•Slide
•Superslide
Media Size Allows you to choose the size of the media available for the selected printer.
Media Type Allows you to choose the media types available for the selected printer.
Available options are:
• Paper
•Clear Film
• Blue Film
Destination Allows you to choose the destinations available for the selected printer.
Available options are:
• Magazine
• Processor
Magnification Type Allows you to choose the magnification types available for the selected
printer.
Available options are:
•Replicate
• Bilinear
•Cubic
•None
Auto Print
[ON] [OFF]
If Auto Tag is enabled, turning Auto Print [ON] will automatically print all
images that have the Auto Tag mark when the Image Viewer screen is closed.
[OFF] disables the Auto Print function.
Upon closing the
exam…
Allows the choice to automatically re-print or to not print any images that
were printed manually from the Image Viewer screen.
[SAVE] Saves the current selections and values as the default printing configuration.
Function Description
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
