Chapter A3: Worklist
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A3-2
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure A3-1 Worklist screen
Table A3-1 lists and describes all the functions on the Worklist screen.
Table A3-1 Worklist Functions
Function Description
navigation bar Allows you to change between the Worklist, Image Management,
and Utilities screens or allows you to logoff the system (if
applicable). The darker color indicates which screen is currently
displayed. The individual buttons are described below.
[WORKLIST] Opens the Worklist screen where patient procedures may be
added to the schedule and exams started.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
