Chapter A3: Worklist
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A3-3
Operator Manual © 2008 General Electric Company. All rights reserved.
[IMAGE MANAGEMENT] Opens the Image Management screen where images may be
selected for viewing or be copied to other exams.
Refer to Chapter A6: Image Management
for more information.
[UTILITIES] Opens a screen where system settings (such as Network and
Printer connections) and preferences may be changed. If the
Login function is enabled, the preferences you are allowed to
change will vary depending on your level of access.
Refer to Chapter A7: Set Preferences
for more information.
[LOG OFF] If the Login function is enabled, pressing this button logs the
current user off of the system.
Refer to Chapter A2: General Information-Login and Log off
(p. A2-
5) for more information.
Search Searches for procedures by the selected column name in the
drop-down list and the search criteria entered into the text box.
For mobile units, Search is only available when the unit is
connected to the network.
Refer to Search
(p. A3-7) for more information.
[KEYBOARD] Brings up the virtual keyboard so that you may type text into the
Search text box.
Refer to Chapter A2: General Information-Virtual Keyboard
(p. A2-
2) for more information.
[REFRESH LIST] Updates the Worklist view with new information from the HIS or
RIS, which shows changes to the procedure records. Also removes
any filters that have been applied.
For mobile units, refresh is only available when the unit is
connected to the network.
Refer to Refresh
(p. A3-11) for more information on automatically
refreshing the Worklist.
[FILTER LIST] Displays a Worklist query screen and filters the RIS or HIS records
to find procedures that meet specific criteria.
For mobile units, filtering is only available when the unit is
connected to the network.
Refer to Filter List
(p. A3-8) for information on how to filter the
Worklist.
Function Description
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
