Chapter A3: Worklist
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A3-4
Operator Manual © 2008 General Electric Company. All rights reserved.
Patient List Area Shows all procedures scheduled for examinations during a
working day. Procedures on the list may be downloaded from the
RIS/HIS or may be created locally.
The list may be sorted by column, searched, or filtered. Refer to
Manage List / Find Procedures
(p. A3-7) for more information.
The time period displayed is configurable. Refer to Chapter A7: Set
Preferences-Worklist (p. A7-13) for information on changing the
time period displayed.
[PATIENT INFORMATION] Shows the Patient Information screen for the selected procedure.
NOTE: Patient Information is editable if the currently selected
procedure has not been opened. Once the exam starts the
Patient Information is no longer editable. Patient
Information is not editable if multiple procedures are
selected.
Refer to Add / Edit Patient Information
(p. A3-15) for more
information.
[ADD PATIENT] Allows you to enter patient information and adds the patient to
the Patient List.
Refer to Add / Edit Patient Information
(p. A3-15) for more
information.
[DELETE] or [DELETE ALL] Switches between [DELETE] and [DELETE ALL] to remove
procedures from the Worklist.
[DELETE] - Removes the selected procedure or procedures from
the Patient List.
[DELETE ALL] - Removes all completed and discontinued
procedures from the Patient List.
NOTE: [DELETE] or [DELETE ALL] does not remove procedures from
the RIS or HIS or remove any exam images from the image
database.
Refer to Delete Procedures
(p. A3-12) for more information.
[START EXAM] or [RESUME
EXAM]
Starts, continues, or appends the selected procedure.
The button name changes depending on the Scheduled Status of
the selected procedure. If the selected procedure has a Status of
“Suspended”, the button name changes to
[RESUME EXAM].
Function Description
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
