Chapter A3: Worklist
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) A3-5
Operator Manual © 2008 General Electric Company. All rights reserved.
[EMERGENCY EXAM] Begins an exam without selecting a procedure from the Patient
List or adding the patient. The system will assign a unique
tracking number as the Patient Name.
Refer to Chapter A4: Image Acquisition-Conduct an Emergency
Exam (p. A4-12) for more information.
The tracking number is the date and time the exam was initiated.
The time is recorded to the second.
[CASSETTE EXAM] Begins a cassette exam. Cassette exams allow exposures to be
taken without any digital patient record or image storage.
Refer to Chapter A4: Image Acquisition-Conduct a Cassette Exam
(p. A4-10) for more information.
network connection status Appears when the Definium AMX 700 is connected to the hospital
network.
wireless network connection
status
If the wireless network connection is enabled, displays the status
of the connection and signal strength. Refer to Chapter A2:
General Information-Wireless Network Connection (p. A2-7) for
more information.
system status Displays the last system status message.
To clear the system status area, open the Message Log and close
it again.
Refer to Chapter A2: General Information-System Status and
Messages (p. A2-10) for more information.
[MESSAGE LOG] Brings up the message log since the last system re-start.
Refer to Chapter A2: General Information-System Status and
Messages (p. A2-10) for more information.
[QAP] Brings up the screens that allow you to perform QAP.
Refer to Chapter A8: Quality Assurance Process and Maintenance
for more information.
[EXPOSE HOLD] Appears when there is some condition that prevents an x-ray
from being taken.
Press the button to view a list of all errors and interlocks that are
preventing the exposure. The items are removed from the list as
they are corrected. The button disappears when all errors and
interlocks are corrected.
Function Description
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
