Section 9 — Working with Routes
171
To take recordings using a route:
1. Press Route from the main menu.
2. Use and to scroll through the list and select a route.
TIP: Use the arrow keys on the right to see the machines listed on
your selected route.
3. Press — The screen displays the machines and locations. The
highlight bar indicates where the route will start. Beside each
location is a number indicating how many route entries will be
recorded.
TIP: Use the arrow keys to see the route entries attached to each
location.
4. Press Change Font Size to increase or decrease the font size
of the displayed Route contents,
5. Change the time format displayed on the Route screen to 12- or 24-
hour format (as required).
MORE: See Adjust Date or Time Format for more information.
6. Attach your sensor to the location indicated on your instrument's
screen.
TIP: Highlight the location (rather than one of its parameter sets) if
you want to record all parameter sets at this location
automatically (instead of manually starting each measurement).
To Next Page
Loading...
