GE MEDICAL SYSTEMS
D
IRECTION FK091075, REVISION 04 VIVID 3N PRO/EXPERT SERVICE MANUAL
Chapter 7 Diagnostics/Troubleshooting 7-45
7-3-8-6 Pencil Probe Test (cont’d)
Figure 7-24 Report Dialog Box - Pencil Probe Test (Close)
The Report dialog box includes the following:
• Test Result Message: Displays the test result.
• Pencil Probe Relays: Displays a graphic representation of the eight front board pencil probe
relays, as follows:
• Each relay is represented by a button (highlighted in green) that displays the relay
number.
• Each button is highlighted in yellow when selected.
• Each button is highlighted in red if errors were detected for one or more relays.
• Checkboxes: Enable you to manipulate bad channels:
• Show Only Bad Channels: Select this checkbox to display only the bad channels in the
Display area.
• Mark bad Channel: Select this checkbox to manually mark the currently selected vector
as bad.
To Next Page
Loading...
