GE MEDICAL SYSTEMS
D
IRECTION FK091075, REVISION 04 VIVID 3N PRO/EXPERT SERVICE MANUAL
Chapter 7 Diagnostics/Troubleshooting 7-81
7-4-6-1 MOD Diagnostic Test (cont’d)
3) Trackball to the MO radio button and press Select.
4) Trackball to the IsMediaAccess button an press Select. The message Media in drive G is
accessible is displayed.
5) Trackball to the Eject button and press Select. The message Media is outside is displayed. Verify
that the media has actually been ejected.
6) Trackball to the Load button and press Select. The message Media is inside is displayed. Verify
that the media is actually inside.
7) Trackball to the Format button and press Select. The message Media in drive G was formatted
successfully is displayed.
8) Trackball to the GetVolInfo button and press Select. The message Media in drive G has
following properties: Media Label = MY_LABEL, Media File-System Name = FAT is displayed.
9) Trackball to the GetBtPSector button and press Select. The message The Bytes Per Sector
value of media in drive G is 512 is displayed.
10) Trackball to the SetVolLabel1 button and press Select.The message Media Label set to
TEST_LABEL1 is displayed.
To Next Page
Loading...
