GE MEDICAL SYSTEMS
D
IRECTION FK091075, REVISION 04 VIVID 3N PRO/EXPERT SERVICE MANUAL
Chapter 8 Replacement Procedures 8-63
8-5-2-5 BEP1 - Front Cover Removal Procedure
1) Remove the screw that secures the front cover in position - see Figure 8-58 "BEP1 - Front Cover
Screw" on page 8-63.
2) Press the two plastic latches, while pushing the front cover until it released.
8-5-2-6 BEP1 - Front Cover Installation Procedure
1) Return the front cover, pushing it into position on the front of the BEP1.
2) Replace and tighten the screw that secures the front cover in position - see Figure 8-58, above.
Figure 8-58 BEP1 - Front Cover Screw
Screw
To Next Page
Loading...
