GE MEDICAL SYSTEMS
D
IRECTION FK091075, REVISION 04 VIVID 3N PRO/EXPERT SERVICE MANUAL
8-148 Section 8-8 - Peripherals
8-8-5-4 Sony UP-21MD Color Video Printer Installation - Procedure1 (cont’d)
8.) Remove the right and left screws located at the front of the lower section top cover, as shown in
Figure 8-134.
Figure 8-134 Top Cover Screws
9) Place the protective metal cover on top of the printer shelf (either on the right or left side, as
preferred by the customer) and fasten securely into position to protect the connectors, using the
two screws provided - see Figure 8-135 below:
Figure 8-135 Printer Shelf with Protective Metal Cover Secured in Position
10) Place the shelf on the top surface, with its two legs facing the front, and the stoppers (located on
top of the shelf) facing the far end. Fasten the shelf to the top surface, using the screws removed
in step 8, as shown in Figure 8-136 below.
Screw
Screw
Metal Cover
To Next Page
Loading...
