GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
Chapter 3 - System setup 3 - 47
3-10-6 Set the Remote Archive’s Network Information
To be able to connect to a remote archive, on a remote computer or server, you must configure
VIVID E9 to communicate with it.
In the Remote Archive Setup area of the Tcpip screen (see example in Figure 3-32), enter the;
1.) Remote Archive IP address. (Default IP Address from factory: 10.0.0.4).
2.) Remote Archive Name. (Default Remote Archive Name from factory: ECHOPAC7-000001).
.
Figure 3-32 TCP/IP Set-up for VIVID E9
IP ADDRESS FOR THE
REMOTE ARCHIVE
COMPUTER NAME FOR
THE REMOTE ARCHIVE