GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
8 - 10 Section 8-4 - Reloading the software
8-4-5 Data Management - moving all images
For instructions, please see “Disk management” in the User Manual/User Guide.
8-4-6 Backing up the Patient Archive and System Configurations
Backup the Patient Archive and System Configurations.
For instructions, please see “Data Backup and Restore” in the User Manual/User Guide.
NOTICE
An error, or a power loss may occur.
Always backup the Patient Archive and the System Configurations before loading the software!
In order to complete a successful restore of the Patient Database, as needed after a hard disk
replacement, or if all the content on the hard disk has been erased, the images must be moved
away from VIVID E9 before doing backup of the Patient Database. Depending on the location
set-up, either move the images to a remote server or to removable media like DVD or CD discs.
As the images are moved, the database will point to the new location.
If the backup procedure is not completed correctly, the images and database information will
be lost.
NOTICE
An error, or a power loss may occur.
Always backup the Patient Archive and the System Configurations before loading the software!
In order to complete a successful restore of the Patient Database, as needed after a hard disk
replacement, or if all the content on the hard disk has been erased, the images must be moved
away from VIVID E9 before doing backup of the Patient Database. Depending on the location
set-up, either move the images to a remote server or to removable media like DVD or CD discs.
As the images are moved, the database will point to the new location.
If the backup procedure is not completed correctly, the images and database information will
be lost.
To Next Page
Loading...
