GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
Chapter 4 - General procedures and Functional checks 4 - 37
Section 4-3
Functional checks
4-3-1 Preparation
Turn on power to VIVID E9.
4-3-2 2D Mode (B mode) Checks
4-3-2-1 Introduction
The 2D Mode is the system’s default mode.
4-3-2-2 Preparations
1.) Connect one of the probes.
-See "Connecting Probes" on page 3-24 for info about connecting the probes.
2.) Turn ON the scanner.
The 2D Mode window is displayed (default mode).
Figure 4-37 2D Mode Screen Example
Status Window
Control Menu