GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
Chapter 4 - General procedures and Functional checks 4 - 15
4-2-5 Logging on to VIVID E9 as ‘ADM’
To select Config, choose either Procedure A or Procedure B:
A.) Procedure A: On the Touch Screen:
1.) Select the Utility tab.
2.) Then select Config.
B.) Procedure B: On the alphanumeric keyboard:
•Press F2.
Both method A and B will bring up the Operator Login dialog where you must log on.
Figure 4-14 Select Utility
Figure 4-15 Select Config
Figure 4-16 Operator Login
UTILITY
CONFIG