GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
5 - 74 Section 5-9 - Back End Processor (BEP)
5-9-15 IO Board
5-9-15-1 General description
Different I/O Boards are used for BEP6 and BEP5:
• The BEP6 I/O Board has two connectors for connection to the BEP6 Motherboard.
• The BEP5 I/O Board has one connector for connection to the BEP5 Motherboard.
The IO Board is interfaceing between the:
• BEP and the connectors on the rear side of VIVID E9 (video/audio/USB)
• BEP and the Top Console
• BEP and the internal printer
• Audio for the speakers, the rear plugs and the DVR
• (BEP5 I/O ONLY) Boundary Scan from the BEP to boards in the Front End Card Rack
5-9-15-2 Location in the unit
At the rear of the BEP with the Rear panel available at the rear of the VIVID E9.
5-9-15-3 Input DC voltages
Internal in BEP from the BEP Power Supply.