GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
9 - 34 Section 9-7 - Top Console parts
9-7-5 Operator Panel Cable Kit for Vivid E9 and Logiq E9
Table 9-21 Operator Panel Cable Kit for Vivid E9 and Logiq E9 sheet 1 of 2
ITEM PART NAME PART NUMBER DESCRIPTION QTY CRU FRU
1.
Operator Panel Cable Kit for VIVID E9
and LOGIQ E9
(OP Cable Kit 2)
5207000-46
• OP Cable Kit 2 is for use with GA200865
(Upper OP Panel 4).
• OP Cable Kit 2 can also be used for
GA200822 (Upper OP Panel 3) as a
second choice if GA200446 is
unavailabe.
1NY
Trackball USB Cable
For connection between Trackball and
Main Controller Board.
Trackball Switch Cable (First version)
For connecting the switches located
around the Trackball to the USB interface.
Trackball Switch Cable (Second
Version)
For connecting the switches located
around the Trackball to the USB interface.
USB Video Board Flex Cable (New type
- CMO display)
For connection between the USB Video
Board and the LCD Display.
(Connectors in opposite direction).
USB Video Board Flex Cable
(Old type - NEC display)
For connection between the USB Video
Board and the LCD Display.
(Connectors in same direction)
HV Inverter Cable
For connection between the HV Inverter
Board and the Main Controller Board.
Not Used for VIVID E9
Cable tie (2x)
For fixing Trackball USB Cable. (Not Illustrated).