GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
Chapter 4 - General procedures and Functional checks 4 - 29
4-2-7-17 Admin — System Admin
1.) Select Config/F2 to log on as ADM. (Default password: ulsadm).
For a detailed description, see: 4-2-5 "Logging on to VIVID E9 as ‘ADM’" on page 4-15.
2.) Select Admin > System Admin.
3.) Record the SW Option Key - one or more alphanumeric strings - from the SW Option Key field.
Figure 4-28 System Admin (Example)
WARNINGWARNING
MAKE SURE THAT THE SOFTWARE OPTION KEY (ALPHANUMERIC PASSWORDS)
HAVE BEEN RECORDED CORRECTLY. IF THE KEY IS INCORRECT, YOU WILL NOT BE
ABLE TO LOG ON AFTER THE SOFTWARE INSTALLATION HAS BEEN COMPLETED.
THE PASSWORD IS CASE SENSITIVE. HYPHENS MUST ALSO BE RECORDED. THERE
MAY BE MORE THAN ONE PASSWORD.
Table 4-3 Software Options Keys
SW OPTIONS KEYS
To Next Page
Loading...
