GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
8 - 36 Section 8-4 - Reloading the software
8-4-10-6 Press B. Repair/Upgrade Partitions C:\ (cont’d)
Figure 8-42 Installing the Application software
When the Application software has been installed, the InSite ExC software is installed.
Figure 8-43 Installing the InSite ExC software
After the InSite ExC software has been installed, the installation is complete and you are prompted
to restart the Vivid E9.
9.) Remove the CD from the DVD/CD drive.
10.)Select OK to restart.
When you have selected OK to restart, the CD/DVD drawer will close, and the Vivid E9 will restart.
Figure 8-44 Installation complete. Restart the Vivid E9 and remove the CD.