GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
Chapter 8 - Replacement procedures 8 - 55
8-5-10-2 Remove the I/O Door (cont’d)
8-5-10-3 Install the I/O Door
Follow these steps to install the Door I/O Panel:
1.) Place the Door I/O Panel into position by sliding lower hinge onto lower hinge post.
2.) Pop the upper hinge into place onto the upper hinge post.
Figure 8-57 Hinge placement on Door I/O Panel
UPPER HINGE
UPPER HINGE
POST
LOWER HINGE
POST
LOWER HINGE