GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
Chapter 8 - Replacement procedures 8 - 175
8-7-1-2 XY Mechanism removal procedure
1.) From the rear side of the VIVID E9, remove the four (4x) fixing screws.
2.) Remove the XY mechanism.
Figure 8-180 Operator Panels have been removed
Figure 8-181 Remove screws for the XY (Frogleg) mechanism
NOTE!
MAIN CABLE IS NOT SHOWN IN
THIS PICTURE.
REMOVE FOUR (4X) SCREWS
To Next Page
Loading...
