GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
Chapter 8 - Replacement procedures 8 - 199
8-8-5-2 Fan Assembly removal procedure
Follow these steps to remove the Fan Assembly:
1.) Disconnect the PCIe express cable from the GFI board visible at the front of the Card Rack Cover.
2.) Unscrew the thumb screws of the Card Rack Cover.
3.) Remove the Card Rack Cover.
4.) Pull the Fan Assembly out of the frame.
8-8-5-3 Fan Assembly installation procedure
Follow these steps to install the Fan Assembly:
1.) Align the Fan Assembly with the rails in the frame and push it into position.
2.) Install the Card Rack Cover.
3.) Install the thumb screws of the Card Rack Cover.
4.) Connect the PCIe express cable to the GFI board connector.
Figure 8-203 Fan Assembly removal
To Next Page
Loading...
