GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
Chapter 8 - Replacement procedures 8 - 219
8-10-1 Front End parts overview
The table below list the positions of the cards. Position #1 is nearest the probe connectors (front of unit).
NOTE: The number of each card type depends on VIVID E9 model card version (P/N) and installed
options.
Figure 8-216 Cards in Front End rack
Table 8-6 FEP Cards per VIVID E9 sheet 1 of 2
CARD
POSITION
ABBREVIATION CARD NAME
TOTAL NUMBER OF CARDS PER SYSTEM
BT’09 BT’11 BT’12
SW v108.x.x
SW v110.0.0
to v110.1.3
SW v110.1.4
(or higher)
SW v112.0.x
1RLY
RELAY BOARD
1x 1x 1x 1x
2GRX64
ANALOG RECEIVER BOARD
1x 1x 1x 1x
3 GRX128
ANALOG RECEIVER BOARD
1x 1x 1x 1x
4 GTX-TLP192
TRANSMITTER BOARD
NOT USED NOT USED 1x 1x
5 GTX-TLP3
TRANSMITTER BOARD
4x
NOT USED NOT USED NOT USED
6 GTX-TLP3
TRANSMITTER BOARD
3x
NOT USED NOT USED
7GTX-TLP3
TRANSMITTER BOARD
NOT USED NOT USED
8GTX-TLP3
TRANSMITTER BOARD
NOT USED NOT USED
9DRX
EMPTY
NOT USED NOT USED NOT USED NOT USED
UPPER FRONT
PLANE CARD
LOWER FRONT
PLANE CARD