GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
8 - 266 Section 8-11 - Back End Processor (BEP) parts replacement
8-11-4-5 Installing the Graphics Adapter in the BEP6
Follow these steps to install the (new) Graphics Adapter:
1.) Plug in the (new) Graphics Adapter.
2.) Insert and fasten the fixing screw.
3.) Plug in the cables you removed earlier:.
- Connections if DVR is installed in the BEP6:
- Connection if the BEP6 is without DVR:
4.) Install the fixing screws you removed earlier..
5.) Install the HDD.
DVI Flex Main Yggdrasil
DVI-Samtech Flex
DVR Audio
DVI-SAMTECH FLEX