GE Vivid E9

GE H EALTHCARE
D IRECTION GA091568, R EVISION 5 VIVID E9 S ERVICE M ANUAL
Chapter 8 - Replacement procedures 8 - 309
8-14-2-5 BEP6 - Digital Video Recorder installation procedure
Follow these steps to install the Digital Video Recorder:
1.) Plug in the (new) DVR Board in the correct slot.
2.) Insert and fasten the fixing screw.
3.) Plug in the cables you removed earlier:.
- Connections if the DVR Board is installed in a VIVID E9 with 4D:
- Connections if the DVR Board is installed in a VIVID E9 with 2D:
4.) Install the fixing screws you removed earlier.
5.) Install the HDD.
DVI Flex Main Yggdrasil
DVI-Samtech Flex
DVR Audio
CN SATA5
CN SATA3
DVR TO SATA
DVI-Samtech Flex
DVR Audio
CN SATA5
CN SATA3
DVR TO SATA