The Filled Predefined Tracklogs are:
• Hidrography I
• Hidrography II
• Earth Surfaces
• Wetland
• Metropolitan Area
• Building Area
• Military Area
• Airport Area
• Cemetery Area
• National/State Park
• Urban Area
• Desert Area
• Swamp Area
• Glacier Area
• Mountainous Area
• Yellow Map Background
Tracklog Color
The Tracklog color can be modified, through the
<Tracklog Color
> button.
Scalable Tracklogs
The parameters of the Tracklog scale can be defined through the scale box. The scalable Tracklog stays on screen
until the defined scale is exceeded. Then the Tracklog will be hidden. For further information, see Scalable
Tracklogs.
Default style of the Tracklog
To apply the default style, just press the button with the image of the Tracklog Default.
Defining a Tracklog as Default
To define the chosen Tracklog as default, press the button. This pattern will be used every time that the
program creates a new Tracklog or imports it from a file that is not standard GTM.
TIP: to show Tracklogs by style, the button located on the Tool Bar must be released, otherwise,
Tracklogs will be shown in different colors.
47
To Next Page
Loading...
