4.7 Uniting Tracklogs and Routes with the Drawing Tools
Different Tracklogs can be united with the following Vector Drawing Tools.
Pencil Tool
Handfree Drawing Tool
Line Drawing Tool
To unite Tracklogs, press the
Detect Elements
button and one of the tools listed above. Place the mouse
arrow on the extremity of a Tracklog, press the left button and drag the mouse to the other extremity of Tracklog.
To conclude the union, release the left button if you are using the pencil tool or click again for the other tools.
To unite Routes, press the
Detect Elements
button and the Route Creation Tool button . Place the mouse
arrow on the extremity of a Route, press the left button and drag the mouse to the other extremity of Route. To
conclude the union, release the left button.
If you wish to open a window to confirm the union, see the topic Configuring the Behavior of the Program.
Note: Tracklogs and Routes cannot be united.
50
To Next Page
Loading...
