1.2 Hardware Key
The information below applies only to GTM PRO® Users.
The Hardware Key or
dongle
is an electronic plug that works as an
unlock password of the GTM PRO®. The plug is easily connected to
the printer port or USB port, and must be present when GPS
TrackMaker Professional® is being executed.
The plug doesn't interfere in the operation of printers, scanners or
other devices.
The license by Hardware Key is used by GPS TrackMaker Professional® 4.0 or above.
To purchase the Hardware Key, please contact the store where you purchased GTM PRO® or the Author at
www.trackmaker.com
7
To Next Page
Loading...
