GDS3710 User Manual
Version 1.0.7.8
If selected, the GDSManager will popup alarm window and sound alarm in
the computer speaker.
If selected, GDS3710 will call pre-configured (video or audio) phone and
will play sound alarm.
If selected, an email with snapshot will be sent to the pre-configured email
destination.
If selected, GDS3710 will play alarm audio using built-in speaker.
If selected, the alarm will be sent to the equipment (for example: Siren)
connected to Alarm Output interface.
If selected, snapshots at the moment where the event is triggered will be
sent to preconfigured destination (e.g.: FTP or email).
Alarm Phone List
This page allows users to configure the Alarm Phone List, which are phone numbers or extensions list that
the GDS3710 will call out when event is trigged (e.g.: doorbell pressed).
Figure 82: Alarm Phone List
Table 30: Alarm Phone List
Select the SIP Account to be used by the GDS when alarm out is triggered.
Add or delete number from the phone alarm list. (When IP address is used
then the port needs to be appended, example: 192.168.1.12:5060).