GDS3710 User Manual
Version 1.0.7.8
Network Settings
This page allows users to set either a static or DHCP IP address to access the GDS3710.
Figure 62: Basic Settings Page
Table 12: Basic Settings
Selects DHCP or Static IP. Default DHCP. (Static recommended)
Configures the Static IP of the GDS3710.
Configures the Associated Subnet Mask.
Configures the Gateway IP address.
Specifies the DNS type used: Dynamic DNS or Static DNS.
Configures DNS Server 1 IP address.
Configures DNS Server 2 IP address.
Controls the LLDP (Link Layer Discovery Protocol) service. The default
setting is “Enabled”.
Layer 2 QoS
802.1Q/VLAN Tag
Assigns the VLAN Tag of the Layer 2 QoS packets.
Default value is 0.
Layer 2 QoS 802.1p
Priority Value
Assigns the priority value of the Layer2 QoS packets.
Default value is 0.