Grandstream Networks GDS3710 User Manual

P a g e | 108
GDS3710 User Manual
Version 1.0.7.8
Once the event is triggered (Motion Detection, Door Bell Pressed…), the GDS3710 will call the first number,
once time out is reached and no answer is returned from the first number, the GDS3710 will try the next
number on the list and so on. Once the remote phone answers the call, an alarm will be played to notify
users that an event is triggered.
Email & FTP Settings
This page contains Email and FTP Settings.
Email Settings
This page allows users to configure email client to send out an email when the alarm is trigged.
Figure 83: Email Settings - SMTP Page
Table 31: Email Settings - SMTP
SMTP Server
Configures the SMTP Email Server IP or Domain Name.
SMTP Server Port
Specifies the Port number used by server to send email.
From E-mail address
Specifies email address of alarm email sending from, usually client email ID.
Sender Email ID
Specifies sender’s User ID or account ID in the email system used.
Sender Email
Password
Specifies sender’s password of the email account.
Alarm-To Email
Address 1
Specifies the 1
st
email address to receive the alarm email.

Grandstream Networks GDS3710 Specifications

General

Brand	Grandstream Networks
Model	GDS3710
Category	Intercom System
Language	English