Grandstream Networks GDS3710 - System Settings; Date & Time Settings; Table 11: Date & Time; Figure 61: Date & Time Page

P a g e | 81
GDS3710 User Manual
Version 1.0.7.8
System Settings
This page allows users to configure date and time, network settings as well as access method to the
GDS3710 and password for accessing the Web GUI.
Date & Time Settings
This page allows users to adjust system date and time of the GDS3710.
Figure 61: Date & Time Page
Table 11: Date & Time
System Time
Displays the current system time.
Allow DHCP Option 42
to override NTP server
Defines whether DHCP Option 42 should override NTP server or not. When
enabled, DHCP Option 42 will override the NTP server if it’s set up on the
LAN. The default setting is “Yes”.
Sync PC
Clicks to synchronize current time with the computer.
Time Zone
Selects from drop down menu the preferred time zone.
Enable Daylight Saving
Time
Enables Daylight Saving Time.
Start time
Selects the Start time of DST.
End Time
Selects DST end time.
Enable NTP
Enables NTP to synchronize device time.
NTP Server
Configures the domain name of NTP server.
Update Interval
Configures the Interval (in minutes) to retrieve updates from the NTP server.