Grandstream Networks GDS3710 - Account [1-4] White List

P a g e | 92
GDS3710 User Manual
Version 1.0.7.8
SIP TLS Certificate
Input the TLS certificate here for encryption.
SIP TLS Private Key
Input private key here for TLS security protection.
SIP TLS Private Key
Password
Specifies the password for SIP TLS private Key.
Enable Direct IP Call
Accepts peer-to-peer IP call (over UDP only) without SIP server.
Default is “Enabled”.
Enable two-way SIP
Calling
Allows the user to enable/disable the alarm sound during a SIP call
triggered by doorbell pressing.
Enable two-way SIP
Calling
Allows the user to enable/disable the alarm sound during a SIP call
triggered by doorbell pressing.
SIP Proxy Compatibility
Mode
Enables more proxy compatibility with cost of bandwidth, the SIP call will
send audio no matter what.
SIP Packetization
Compatibility Mode
When enabled, the GDS will have in SDP “packetization-mode = 0”. This
is required when GDS is interacting with legacy video phones that only
accepts this value to decode the RTP.
Enable Multi-channel
Call Mode
This feature allows the device to receive multiple calls at the same time,
with one active and others on hold (up to 4 calls maximum). The first call
the blue LED light will light up keypad digit “1”, 2nd call will light up keypad
digit “2”, and so on. On hold call will have related digit blinking while active
call will have the digit blue LED solid light up. Call can be switched by
pressing the blinking digits.
Allow Reset Via SIP
NOTIFY
Allows to factory reset the devices directly through SIP Notify.
If “Allow Reset Via SIP NOTIFY” is “check”, then once the GDS3710
receives the SIP NOTIFY from the SIP server with Event: reset, the
GDS3710 will perform a factory reset after authentication.
This authentication can be either with:
• The admin password if no SIP account is configured on the GDS3710.
• The SIP User ID and Password credentials of the SIP account if
configured on the GDS3710.
Default is unchecked (disabled).
Account [1-4] White List
This page allows users to configure the white list per account, which is a phone number or extension list
that can call the GDS3710. (The call will be automatically answered when calling from a phone set on the
white list, and all other inbound calls will be blocked), the user can configure up to 30 white phone numbers
per SIP account.