Grandstream Networks GDS3710 - Getting Started with GDS3710; Equipment Packaging and Unpacking

P a g e | 26
GDS3710 User Manual
Version 1.0.7.8
GETTING STARTED
This chapter provides basic installation instructions including the list of the packaging contents and
information for obtaining the best performance using the GDS3710 Video Door System.
Equipment Packaging
Table 3: Equipment Packaging
• 1 x GDS3710
• 1 x Installation Bracket
• 1 x Drilling Template
• 1 x Protecting Cap
• 3 x Rubber Gaskets (for sealing the
back cable)
• 6 x Back Panel Screws
• 6 x Bracket Screws and Anchors
• 4 x Anti-tamper screws
• 1 x Anti-Tamper Hex Key
• 1 x Wiegand Cable
• 1 x Lens Cleaning Cloth
• 1 x RFID Card (more can be purchased
from Partner/reseller)
• 1 x Key Fob (more can be purchased from
Partner/reseller)
• 1 x Frame Back Cover
• 1 x Quick Installation Guide
• 1 x GPL License
Figure 1: GDS3710 Package
Note: Check the package before installation. If you find anything missing, contact your system administrator