EasyManuals Logo
Home>Grandstream Networks>Intercom System>GDS3710

Grandstream Networks GDS3710 User Manual

Grandstream Networks GDS3710
133 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
P a g e | 91
GDS3710 User Manual
Version 1.0.7.8
Figure 67: Phone Settings Page
Table 16: Phone Settings
STUN Server
Configures the STUN server FQDN or IP. If the device is behind a non-
symmetric router, STUN server can help to penetrate & resolve NAT
issues.
Local RTP Port
Sets the local RTP port for media. Default setting is 5004. Range between
1024~65400.
Use Random Port
Forces the GDS to use random ports for both SIP and RTP messages.
This is usually necessary when multiple units are behind the same full cone
NAT. The default setting is “Disabled”
Note: This parameter must be set to “Disabled” for Direct IP Calling to
work.
Auto On-Hook Timer
Configures the auto on-hook timer (in seconds) for automatic
disconnecting the SIP call. Default setting is 300. Range between
0~65535.
Ring Timeout(s)
Specifies the Ring timeout, when no reply is returned from the called party
after exceeding this field, the GDS will hang up the call. The value is in the
range of 0s – 90s. By default; it is “30” seconds.

Table of Contents

Other manuals for Grandstream Networks GDS3710

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Grandstream Networks GDS3710 and is the answer not in the manual?

Grandstream Networks GDS3710 Specifications

General IconGeneral
BrandGrandstream Networks
ModelGDS3710
CategoryIntercom System
LanguageEnglish

Related product manuals