Specify the template for the event log messages that will be sent to
the server, users can use the following variables to customize the
message:
• ${MAC} : MAC Address
• ${TYPE} : Event Type
• ${WARNING_MSG} : Event Message
• ${DATE} : Date & Time
• ${CARDID} : Card Number
• ${SIPNUM} : SIP Number
Event Log
Users could check all device logs directly from the GDS web UI under the menu “Maintenance → Event
log”.
In order to get logs for a specific date interval, select the Start Time and End Time, then select which Event
type you want to check using the drop-down list, and click on to display the records.
The following Event Types are included for filtering:
• Open Door via Card
• Visiting Log
• Open Door via PIN
• Open Door via DI
• Open door by SI
• Call Log
• Open Door via Card and PIN
• Open Door via Remote PIN
• Motion Detection
• DI Alarm
• Door & Lock Abnormal Alarm
• Dismantle by Force
• System Up
• Reboot
• Reset
• Config Update
• Firmware Update
• Non-scheduled Access
• Hostage Alarm
• Invalid Password
• Temperature Alarm
To Next Page
Loading...
Need help?
General
