Grandstream Networks GDS3710 - Page 84

P a g e | 84
GDS3710 User Manual
Version 1.0.7.8
MJPEG Authentication
Mode
Allows 3
rd
party system integrator or developers to implement related
application for users. By default, this feature is disabled and use more
secured “Challenge+Response” mode.
If enabled, user can send HTTP API with correct credentials to retrieve
MJPEG video stream or JPEG snapshot from GDS3710.
Notes:
1- The MJPEG stream can be retrieved via the following URL
HTML based ➔
http(s)://admin:password@IP_GDS3710:Port/jpeg/mjpeg.html
Stream ➔ http(s)://admin:password@ip:port/jpeg/stream
2- The MJPEG stream retrieved via the methods above is running on
the background and cannot be tuned. If users want more flexibility,
they can use the three configurable video streams as shown on
[Retrieving Video Streams]
RTSP Port
Specifies RTSP port for media stream, default TCP port 554.
User Login Timeout(min)
If no action is made within this time the GDS3710 will logout from the Web
GUI, range is between 3 and 60.
Maximum Number of
Login Attempts
Specifies the allowed login times error limit, if the unsuccessful login
attempts exceed this value, the GDS3710 webGUI will be locked for the
time specified in Login Error Lock Time.
Locking Time of Login
Error (m)
Specifies how long the GDS3710 is locked before a new login attempt is
allowed.
Disable Web Access
Allow or deny the web access to the GDS3710. (HTTP API do not take
effect when this option is enabled).
Note: If both WebUI and SSH are disabled, GDS3710 will get blocked
and not be able to be accessed. Only two ways to get it back:
1. Re-provisioned by ITSP or Service Provider (by adjusting the related
parameters)
2. Hard Reset (GDS3710 has to be offline and uninstalled to perform
this hard reset).
Enable UPnP Discovery
UPnP (or mDNS) function for local discovery. Default setting is enabled.
Enable Anonymous
LiveView
1. When enabled, user can display the camera stream from GDS without
admin credentials using the following URL scheme:
http(s)://GDS3710_IP:port/videoview.html
2. User can also retrieve a real-time snapshot without admin credentials
using the following URL:
http(s)://IP:port/anonymous/snapshot/view.html