GRAPHTEC CE7000-130AP - Page 101

4-17
3
Press the POSITION ( ) key
MEDIA SETTING screen (2/3) is displayed.
4
Press the [3] key (PANEL CUTTING).
PANEL CUTTING screen is displayed.
5
Press the [1] key (OFF).
PANEL CUTTING setting screen is displayed.
6
Press the [1] key (ON) or the [2] key (OFF).
Setting will be conrmed and it will return to the PANEL CUTTING
screen.
Supplement
•
Press the [SLOW] key to select the setting
digits.
•
The partition length can be set from 1.0 to
2000.0 cm.
7
Press the [2] key (DIVIDE LENGHT).
DIVIDE LENGHT screen is displayed.
8
Press the POSITION ( ) keys and increase or decrease the
setting value.
Supplement
It will return to MEDIA SETTING screen (2/3)
without changing the settings when you press
the [ESC] key (PREVIOUS).
9
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to the MEDIA SETTING
screen (2/3).
10
Press the [PAUSE/MENU] key.
It will return to default screen.