GRAPHTEC CE7000-130AP - Assignment

2-21
Assignment
The hold-down force of push rollers on both ends (left/right) should set to the same force in Strong or Medium.
However, when using three or more push rollers, set the hold-down force of the push rollers inside both ends to
lower than both ends.
When using ve push rollers
GOOD
NG
When three hold-down
forces are different
All other than above
Medium Medium
Medium
Strong
Strong
Strong StrongStrong Strong Strong Strong
Strong
Medium
Medium
Medium Medium
Low Low
Low
Low
Low
Medium
Medium
Medium Medium
Medium
Medium
Medium Medium
Medium