GRAPHTEC CE7000-130AP - I;F (LAN) Network Settings

9-5
9.3
I/F (LAN)
Set the network interface (LAN).
Supplement
When you change the settings of the network, the plotter is reset.
To connect through a network (LAN), it is necessary to set the following items.
•
Set the DHCP
•
Set the IP address
•
Set the subnet mask
•
Set the gateway
•
Display the MAC address
Setting the DHCP
DHCP settings depend on the conguration of network equipment and the customer’s environment. For details,
please see the equipment manual, or consult the network administrator.
The default setting of DHCP is OFF.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the POSITION ( ) key (I/F).
INTERFACE screen (1/4) is displayed.