GRAPHTEC CE7000-130AP - Offline Output from USB Memory

6-8
6.4
Ofine Output from USB Memory
Dedicated data that was created by the application software can be saved in the USB memory and output from
the cutting plotter.
Select the data from the menu of the plotter, and then output it in ofine.
Supplement
•
Only 1-byte alphanumeric characters (ASCII) are supported.
•
Windows prohibited characters (¥, /, /, ;, *, ?, ", <, >, |, etc.) are not available.
•
Limit of the number of display characters is 25 characters. More characters than 25 can be displayed by scrolling.
•
Scroll is displayed after a few moments after selecting the item.
•
The extension is "xpf", "plt".
•
The folder is surrounded by '<' and '>'.
•
Name is sorted in ascending order.
•
Files and folders can be obtained up to 64.
•
Files in the second level folder is not available.
Operation
1
Insert the USB memory that saved the dedicated data to the
plotter.
2
Press the [PAUSE/MENU] key.
MENU screen is displayed.
3
Press the POSITION ( ) key (MEM.).
OFF-LINE OPERATION screen (1/1) is displayed.