GRAPHTEC CE7000-130AP - Changing;Storing the RS-232 C Setting

9 -11
5
Press the POSITION ( ) key.
RS-232C No. selecting screen will be displayed.
Supplement
You can set from setting no. 1 to 4.
6
Press the POSITION ( ) keys to select the setting number.
7
Conrm the setting and press the [ESC] key (PREVIOUS).
It will return to RS-232C setting screen.
8
Conrm the setting and press the [ENTER] key (SET).
Setting will be conrmed and it will return to INTERFACE screen (2/4)
9
Press the [PAUSE/MENU] key.
It will return to default screen.
Changing/storing the RS-232C setting
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the POSITION ( ) key (I/F).
INTERFACE screen (1/4) is displayed.