2-32
2.10
Selecting Tool Condition
Set the “TOOL CONDITION (CUT CONDITION) No.”, “TOOL”, “OFFSET”, “SPEED”, “FORCE”, and “ACCEL
(ACCELERATION)”.
LCD Display
Selected condition
Tool number currently used
TOOL CONDITION number currently used
Selecting the TOOL CONDITION number (Condition No.)
Eight settings (1 to 8) as the TOOL CONDITION can be stored. Change the setting in accordance with the material
(8 types) to be used by switching the setting.
Operation: Operation with the [COND/TEST] key
1
Press the [COND/TEST] key in the READY status.
CONDITION setting screen (1/3) is displayed.
2
Press the [1] key (Condition No.).
CONDITION No. selection screen is displayed.
3
Press the POSITION ( ) keys and select the setting
(CONDITION No.).
To Next Page
Loading...
