5-2
5 .1
Overview of Axis Adjustment
For axis adjustment, the inclination of the axis can be adjusted based on the coordination of 2 alignment marks (grit).
In addition, the distance can be adjusted by entering the distance of each point.
Move the tip of each tool to the appropriate point.
Use media that has the plots (grits or alignment marks) required to nd the X and Y axis and the origin point.
Alignment mark
The number of alignment marks is 2 points. The position of each alignment mark is as shown in the following
gure.
Alignment with 2 points
1st point or origin point
2nd point
Example of axis adjustment
Before and after adjustment, axis adjustments are made as shown in the following gure.
Media that already cut and set again
Adjustment point 1
(Origin point of the media already cut)
Adjustment
point 2
Origin point
Reference of this plotter
Plotting
reference
Adjusting the coordinate
axes
New origin point
There is a misalignment between the X-Y axis and origin
point of the plotter and the media plotted.
The misalignment of the X-Y axis and origin point is
adjusted and the misalignment is eliminated.
To Next Page
Loading...
