GRAPHTEC CE7000-130AP - Main Specifications

A-2
A .1
Main Specications
CE7000-130AP
CPU 32bit CPU
Conguration Grit-rolling plotter
Drive Digital servo
Max. Cut Area 1220 mm × 50 m
Guaranteed precision
cutting area
*1 *2
1200 mm × 3 m
Mountable media width
*3
Min: 594 mm
Max: 1321 mm
Available roll media
diameter
Max. diameter: 200 mm,
(3-inch paper core roll only)
The number of push rollers 5
Max. cutting speed 600 mm/s (Omnidirectional)
Speciable speeds
(cm/s)
1 to 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60
Max. cutting force Tool holder : 4. 41N (450gf )
Pen holder : 2.94N (300gf)
Min. character size 5 mm (0.197 in.) alphanumeric Helvetica med. Font
*1
Mechanical resolution 0.005mm
Programmable resolution GP-GL : 0.1/0.05/0.025/0.01 mm
HP-GL
*3
: 0.025 mm
Repeatable accuracy
*1
0.1 mm/in unit of 2 m (Designated Film and Cut Conditions)
Number of cutters/pens 2 pc.
Usable pen type Water-based ber-tip and oil-based ballpoint
Compatible media Mono-vinyl chloride media, uorescent media, and reective media up to 0.25 mm thick (Excluding high-
intensity reective lm)
Interface USB2.0 (Full Speed) , Ethernet 10BASE-T/100BASE-TX, RS-232C
*5
Buffer memory 2 MB
Resident command sets GP-GL/HP-GL
*3
(Control panel switching)
LCD display Graphic type (240 × 128 dot)
Power supply AC100-120 V, AC200-240 V, 50/60 Hz
Power consumption 100 VA or less
Operating environment 10 to 30℃, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy
environment
18 to 28℃, 40 to 65 % R.H. (non-condensing)
External dimensions
(Approx.)
(W × D × H)
*4
1704 mm × 1148 mm × 1215 mm
Weight ( Approx.)
*4
59.4kg
*1: Varies depending on the type of Graphtec-authorized lm and the cutting conditions.
*2: When using basket.
*3: HP-GL is a registered trademark of the US Hewlett Packard Company.
*4: Stand and basket are included.
*5: RS-232C interface is optional depending on region. For details, please contact the distributor where you purchased.