GRAPHTEC CE7000-130AP - High Movement Speed Setting by POSITION Key (POSI. KEY SPEED)

10-10
High Movement Speed Setting by POSITION key (POSI. KEY SPEED)
Press the POSITION ( ) key to set the movement speed when moving the tool carriage.
Operation
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION ( ) key (ADV.).
ADVANCE screen (1/4) is displayed.
3
Press the POSITION ( ) key.
ADVANCE screen (2/4) is displayed.
4
Press the [2] key (POSI. KEY SPEED).
POSI. KEY screen is displayed.
Supplement
You can set the range between 1 and 15 (m/s).
5
Press the POSITION ( ) keys and increase or decrease the
setting value.
Supplement
It will return to ADVANCE screen (2/4) without
changing the settings when you press the [ESC]
key (CANCEL).
6
Conrm the setting and press the [ENTER] key (SET).
Setting will be confirmed and it will return to ADVANCE screen (2/4).
7
Press the [PAUSE/MENU] key.
It will return to default screen.