6-16
6.8
S
etting Paper Exposure Time
This function sets the time the paper/media is acclimated to the operating environment after being pulled off the
paper roll to minimize media expansion or contraction, and prevent it from adversely effecting cutting or plotting.
After the initial feed is complete, the paper will be fed backwards to half the preset feed length and exposed for the
set amount of time.
This function is available when the Initial Feed or if Panel Cutting is ON.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [4] key (MEDIA).
MEDIA SETTING screen (1/3) is displayed.
3
Press the POSITION ( ) key.
MEDIA SETTING screen (3/3) is displayed.
4
Press the [4] key (PAPER READY TIME).
PAPER READY TIME is displayed.
To Next Page
Loading...
