7-12
7. 4
Setting the Distance Adjust
DISTANCE ADJUST value corrects any deviation in the length of cut or plotted line segments, which occurs
depending on the media being used. DISTANCE ADJUST value for the deviation is specied as a percentage of
the total distance. For example, a setting of +0.05% adjusts a distance of 2 m (2,000 mm) by 2,000 x 0.05% = 1
mm, making 2,001 mm.
Supplement
This setting will be saved even if the power is shut off.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [3] key (AREA).
AREA PARAMETERS screen (1/1) is displayed.
3
Press the [4] key (DISTANCE ADJUST).
DISTANCE ADJUST screen is displayed.
4
Press the [1] key (OFF).
DISTANCE ADJUST screen is displayed.
To Next Page
Loading...
